of Asia
American Distributor ~ Netco
Specialists In Electronic Assembly Equipment
SPEEDSET
Lead-Free Reflow Soldering Systems
Pricing - contact us for a quote!
Best solution for lead-free manufacturing
The SMT technique is the leading process used today in electronic circuit board assembly. Consistent with the trend towards lead-free manufacturing Vitron Instruments provides this product with both nitrogen and high power cooling systems. This combination has proved to be the exact solution to this high tech requirement

  • Nitrogen protection system
  • Blocking heating system
  • External high-power water-cooling system
  • Flux collecting system
  • PC PLC controlling system
 

Specification: SR8500
Pre-heating Zone/Length 8 Zones / 2715mm
Pre-heating Zone Temperature Room Temperature - 400° C
Cooling Zone Two (2)
PCB Width Maximum 500mm
PCB Conveyor type Chain and Mesh
PCB Conveyor Speed 0 to 2000mm/minute
PCB Conveyor Direction L to R or R to L (your option)
Power Supply 380 Volts 3 Phase 5 Wires 50/60 Hertz
Power for Heating up 44 Kilowatts
Power for Operation 12 Kilowatts
Machine Weight 1500 Kilograms (3300 pounds)
Machine Dimensions 4650 (L) X 1410 (W) X 1470 (H)
 
Controlling System:
PC & PLC (Siemens) controlling system with excellent function and stable capabilities can run when the PC is shut down. Multi-language version in PC, the test function of the temperature profile is perfect and can meet any parameter.
                           
 
Heating System:
Independent top and bottom heating models (5 to 8)
Multiple zone hot air circulation - several soldering zone settings for lead-free
Fully modularized design - heater and motor can be removed quickly - spend less time to repair
                        
Hot air speed can be adjusted by transducer for any situation
           
 
Cooling System:
External High Power water cooling system ensures the solder is smooth and gleaming
Two cooling zones
           
Cooling speed > 10° C/sec
Exit temperature of the PCB is less that 60° C
           
 
Conveyor System:
Mesh and chain conveyor system are harmonized - minimal distortion when heated
                           
Double gears and rack system synchronized with width adjustment to ensure the rails are parallel
           
Equipped with automatic lubrication device
       
 
Nitrogen System:
Nitrogen can be placed in any zone including preheating zones, cooling zones or soldering zones
           
Nitrogen flux: 10-20m3/hour, Oxygen density: 500-800 ppm
Nitrogen can be used circularly
Nitrogen flux control and oxygen analysis system are easy to adjust
            
 
Flux collecting system:
            Flux removal function
 
                Our flux collection system keep ovens clean for a long time
The environment stays clean too.
 
Functions:
 
 
National Equipment Trader Company
Email: info@inter-netco.com
Home